sand blaster

Specification:

1) Heavy-duty all steel construction;
2) Tank volume: 20Gallon;
3) Air constumptrion: 6-25CFM
4) Overall dimension: 92cm(H)x78cm(L)x38cm(W)
5) Equipped with new sandblast gun and concerned neccessory parts.
6) Working pressure: 60~125PSI
Function:
1) Sandblast parts before welding or painting;
2) Replaceable cerimic tips in nozzle prolonging service life;
3) Use alluminum oxide or glass beads for cleaning;

Specification:

1) Heavy steel construction, double door on the sides
2) Transparent glass viewing window
3) 40-80PSI @ 15-25CFM
4) Working space: 60x84x63cm
5) Overall dimension: 150cm(H)x83cm(L)x63cm(W)
6) Electrical requirements of light: 115V/230V
9) Maximum operation pressure: 125PSI
Function:
Blast rust, corrosion and paint on large parts in a enclosed cabinet to keep dust off the floor and out of the air.

Specification:

1) Natural rubber/vinyl blast gloves
2) Perforated steel flooring-abrasive
3) large particle-separating screen
4) clean-out door.
5) Powder conted inside and outside
6) Air regulator / gauge panel.
7) 14 gauge steel legs (16 gauge panels)
8) Eliminating typical suction pick-up tubes and hoses, media metering
9) Series blast cabinets in an entirely different class from the compectition.
10) Extemal flourescent lighting system,Packed in wooden case.
11) Overall dimension: 100x61x163cm
12) Work area: 94.5x60.5x60.5cm
13) Air pressure range: 60PSI~120PSI
14) Sand capacity: approx 40lb
15) Abrasive media: silica sand, glass beads, silicon carbide, emery, plastic sand, etc.
16) Power requirement: 110V,60Hz or 230V,50Hz
17) Output voltage: 12V