sand blaster

Specification:

1)Always wear eye protection and protective clothing equipment to avoid injuries.
2)Please Pay attention, that the operation pressure never exceed over 6,7 bar.
3)Disconnect the tool from the air-supply before changing accessories or when nothing in use.

Specification:

1) 65-125PSI operation pressure comes with safety pressure release valve and 3/8in brass valve.
2) Using granular abrasives under high pressure and includes 3/8in brass valves.
3) Also comes with 8ft, heavy duty 3/8in.
4) Hose with varbon steel shut-off valve and 4 inter changeable nozzles.
5) Hood and instruction are in stock;
6) Hose length: 10ft
7) tank dimension: 10" dia, 24-1/2"length

Specification:

1) Has safety pressure release valve,3/8in. Brass valves for air throttling and sand metering.
2) Work pressure: 65 to 125PSI
3) baked enamel finish.
4) Heavy duty 3/8in, 8-ft,hose has carbon steel shut off valve and 4 inter changeable nozzles.
5) Hood and instruction are in stock;
6) Hose length: 10ft
7) Tank dimension: 12-1/2"dia, 27"length
8) Pressure gauge indicator: 0~125PSI
9) Required compressed air system (not included): 2HP compressor with 3/8" diameter air hose
10) Recommended media type: glass bead, silicon carbide, alumina, walnut shell, brass bead
11) Recommended use: use with 80, 100,120 grit media, at 60PSI, with 3/32". Nozzle for best results (run time; 45minutes with 90lbs, media
12) Water trap type: push button to drain
13）Accessories: 3/32" nozzle,